Metal Roof Replacement in Pasadena, TX
Curious whether metal makes sense for your home in Pasadena, TX? We'll pass your request to an independent local roofer who inspects at no charge and writes up a metal quote, with a shingle price beside it if you ask. You see what the switch really costs, then decide. This site never sells or installs roofing.
Prefer to talk? Call now(713) 555-0169Not sure if we cover your area? Check now ↓
Free Inspection Request
Takes 30 seconds, or call (713) 555-0169
Your details go to one independent roofer in the Pasadena area, who contacts you directly. See our Referral Marketing Disclosure.
What a Metal Roof Changes
Going from shingles to metal changes the price, the look and the paperwork. Per square foot, metal costs roughly twice what asphalt does in Texas, so the choice often comes down to how long you plan to stay. A clear written quote is the fair way to judge that trade for your house.
Wind is part of why homeowners here ask about metal. Pasadena's own story turned on a storm: once the 1900 hurricane had passed, Red Cross founder Clara Barton shipped strawberry plants to local growers, and Pasadena went on to be called a strawberry capital. In July 2024, Hurricane Beryl produced a 72 mph gust about 4 miles south-southwest of the city. Ask for the wind and impact ratings of the exact panel quoted.
What This Covers
- Removing the old roof. The existing covering comes off so the decking can be checked and repaired before panels go on.
- Measuring and ordering. Panels and trim are sized to your roof's lengths and angles, so careful measuring matters.
- Panel choice. Your roofer explains the panel styles they offer, along with color, finish and the manufacturer's warranty terms.
- Underlayment and flashing. The layer under the metal and the trim at walls, valleys, vents and chimneys are what keep water out.
- Permit and paperwork. A metal roof replacement inside Pasadena city limits needs the same city permit as any other re-roof.
Budgeting for Metal Roof Replacement
Metal sits at the top of the common price range. This Old House puts Texas metal at about $9.55 per square foot in 2026, and HomeAdvisor lists a much wider $6.50 to $18 per square foot for metal in Texas (an estimate, viewed 2026). Gauge, panel style and roof shape explain most of that spread.
| Cost row | Figure | Source (year) |
|---|---|---|
| Texas re-roof, typical total | about $8,634 (common range $6,777–$20,531) | This Old House, 2026 (a cost model) |
| Texas asphalt shingles, per sq ft | about $4.92 per sq ft | This Old House, 2026 |
| Texas architectural shingles, range | $4.50–$7.50 per sq ft | HomeAdvisor, viewed 2026 (an estimate) |
| Texas metal, per sq ft | about $9.55 per sq ft | This Old House, 2026 |
| Houston-area re-roof, average | about $9,500 | HomeAdvisor, viewed 2026 (an estimate) |
Expect a metal bid to run above the typical-total rows. Our roof cost calculator uses $9 to $16 per square foot for metal and shows a range for your home's size. Add the city permit, which Pasadena's fee schedule lists at $40 (fees can change).
From Inspection to Cleanup
- Request a visit. Send the form or call (713) 555-0169. One independent local roofer gets your details.
- Roof check and measurements. The roofer inspects the decking from the attic and measures every slope for panel lengths.
- Side-by-side quote. Ask for metal and shingles on the same estimate, each itemized, so the gap is easy to see.
- Permit filed. Your roofer applies with the City of Pasadena Permit Department before work begins.
- Install. The old roof comes off, decking is repaired, underlayment goes down, then panels and trim.
- Final walk-through. Debris and fasteners are cleared, any city inspection is handled, and you get the warranty papers.
What Sets This Apart
Metal is a specialty, and Texas has no state roofer license to tell you who does it well. Ask to see nearby metal roofs the roofer has done. The usual checks still apply: liability insurance, workers' compensation, a local address and a written, itemized contract, plus registration with Pasadena's Permit Department for work inside the city.
- Impact rating on paper. If a panel carries a Class 4 impact rating, ask your insurer whether it earns a premium credit before you choose. TDI says Class 4 coverings get the highest credit, but each insurer sets its own amount.
- Two warranties. The panel maker's warranty and the roofer's own workmanship promise are separate. Get both in writing.
- Honest pricing. It's illegal in Texas for a roofer to offer to absorb or rebate your insurance deductible, on metal or anything else.
Common Questions
How much more does metal cost than shingles?
Using This Old House's 2026 Texas figures, metal runs about $9.55 per square foot and asphalt shingles about $4.92, so roughly double. HomeAdvisor's metal range is far wider, from $6.50 to $18. A quote for your roof is the only number that counts, so ask for both materials on one estimate.
Does a metal roof need a permit in Pasadena?
Yes. Inside city limits, a residential roof replacement needs a city permit whatever the material, and the fee schedule lists $40 (fees can change). Your roofer pulls it from the Permit Department at City Hall, 1149 Ellsworth Drive. Ask whether they're registered with that department before you sign.
Will metal lower my insurance premium?
Maybe. Texas insurers may credit impact-resistant roofing, and the roofer fills in TDI form PC068 for the product used. No discount is guaranteed, and amounts vary from one company to the next. Call your insurer with the exact product name and rating before you commit to a panel.
Can my HOA say no to a metal roof?
Check your deed restrictions before you sign. Texas law limits HOA bans on certain wind- and hail-resistant shingles, but that rule speaks to shingles, and color or style approval can still apply. Your HOA's architectural committee can tell you what it allows.
Other Roof Work
Still deciding? See how a shingle roof replacement compares, or read about full roof replacement in general. If a storm got you thinking about metal, the storm and hail damage page explains the claim side.
Book a Metal Roof Inspection
A free inspection and a written metal quote cost you nothing and commit you to nothing. Fill in the form and one independent local roofer will call to set a time, or reach us at (713) 555-0169.